|
Exsup Can supply a large range of PET
machinery for pre form and machinery for closures.
We can also offer a range of New Enaiviv
machinery for Pre forms and closures.
We can also offer new high quality moulds please contact
us for more information.
Current Offers
2001 SIG BLOWMAX ECOMAX 10,2
2 Litre Container.
2400 UPH.
2 Cavities
10 Cavities Injection.
PET material.
Injection Moulds 28mm PCO, 28mm DIN, 32 mm
Bericao.
Weight 28 gram (PCO/DIN) 32 Gram (PCO/DIN
Bericap)
Blowing Moulds
11 Bericap 32 gram
0.51 Bericap
0.251 DIN
Price Ex Works 40,000 Euros
2 X 2004 Urola USP - 2 F PET
Stretch Blow moulding machines
Blowing from 250 ml up to 1.5 litre and
250 ml up to 4 litre bottles
Both machines can blow 5 litre with slight
modification.
Also included one 2003 Urola USP 2 F
machine for spare parts.
3 x pre form hopper lift conveyor and
chute assemblies.
2 X Bagging tables..
1 X Out feed Conveyor.
1 X Adjustable Height Mechanism.
5 X Pallets of spare slat band and
conveyor.
Full set of Manuals.
Possibility of a full set of moulds.
£30,000 the lot
Complete plant for the manufacture of plastic
containers
(bottles, cans, caps, lids, sleeves, jars, watering cans,
pots, spoons, displays, etc..) For cosmetics, pharmaceutical, household, food
and beverages, chemical and cleaning products.
Includes complete set of molds. (Almost
200 moulds)
The plant is composed of:
BLOW MOULDING MACHINES:
(2) MATEU
SOLÉ SAB 15 (year
2000)
(2) MATEU
SOLÉ MATSO 40 (year
1970)
(1) PLASTOMAC PTM
5 (year 1980)
(1) SAFIMO E80
S (year 1982)
INJECTION MOULDING MACHINES:
(1) MATEU
SOLÉ ASTRON 150 SD-IICE
(year 2006)
(1) MATEU
SOLÉ METEOR 770/200
(year 1999)
(1) MATEU
SOLÉ METEOR 625/150 (year
1998)
(1) MATEU
SOLÉ METEOR 120/45CEP
(year 1988)
Ancillary equipment: Grinder, plate maker, water coolers,
pumps, electronic scale, vacuum tester, valves cutter machine, compressors,
tank, air dryer, counterbalance truck, heater,
   
2008 Chen PET CP - M120
360 Ton
110 mm Screw
PET preform complete moulds 48 cavity, preform weight 32 grams 3P Alaska (made
in 2008) (Cycle time: ~29 secs)
PET preform complete moulds 48 cavity, preform weight 40 grams 28 PCO (made in
2008) (Cycle time: ~31.5 secs)
PET preform cores for 48 cavity preform weight 51 grams 28 PCO – used on the 40
gram mould (made in 2010) (Cycle time: ~36secs)
PET preform cores & plates for 48 cavity preform weight 28 grams 28 PCO – used
on the 32g mould (made in 2010) (Cycle time: ~27secs)
Contact for complete list
1993 Husky XL300 PET
300 Ton Clamp
1993 Somos D900 PET resin Dryer.
1999 Eisbar DAS 222 Mould Dehumidifier.
Husky 48 Cavity Hot runner.
1998 Husky 48 cavity cold half for 27 gram
PCO pre forms.
16 sec cycle time.
2000 Husky GL300 P100/110 E100
Good condition.
300 Ton
48 Cavity.
100 mm Screw.
100 mm Shooting pot.
Working hours 11,804
Husky 3 stage robot.
2000 Husky S90 RS 35/35.
90 Ton clamp.
Plastic Systems
DR 100HT PET Resin Dryer
Plastic Systems H100-PET Material Hopper
(100L Hopper volume has been designed for a residence of 6 hours)
Plastic Systems P1-L10 3-Phase Hopper/loader
Plastic Systems DS600 Mould Dehumidifier
Mould Enclosure
T-Belt Conveyor
16 Cavity Preform mould for 11.5gm preforms (preform drawing available upon
request)
Cycle time
: 11.5 – 12 sec.
Machine was
installed in 2004 and is in excellent condition.
1991 Husky XL300 PET.
300 ton Clamp
48 Cavity
Piovan T3000 Hopper
Piovan DSN 534HE PET resin dryer.
Fasti MSP20 CN Mould dehumidifier.
1) 2008 Complete Nissei ASB-150 DP Injection
Stretch Blow Moulding system
Consisting of
Nissei ASB-150DP Injection Stretch Blow Moulding machine
Matsui MJ3-150-U PET Resin Dryer
Ingersoll Rand 30HP Low Pressure Screw Compressor
Ingersoll Rand 1-7T2X10 High Pressure Compressor
Ingersoll Rand 2-7T2X10 High Pressure Compressor
Siemend PC Logo Power Compressor Sequencer
Hankison HPRD-0-50-500 Air Dryer (High Pressure)
CYTSA P-1433 500L Air Tank
Complete 5-Cavity toolset for 49.5gm 110mm PET Jars
Cycle time : 16.5 sec.
(Patented Jar design, which requires modifications upon purchase)
Working Hours : 22,400 (Feb 29 2012)
System can be seen in production, in excellent condition
2005 Sacmi BMB PET preform injection moulding
system,
Low working hours!
Consisting of :
Sacmi BMB Sintesi PET 350 Injection Moulding machine (Year 2005)
Plastic Systems Resin Dryer and Hopper
48 Cavity Sacmi Preform Mould for 48gm PCO1810 preforms
Mould change parts for 44gm preforms
48 Cavity Sacmi Preform Mould for 40gm PCO1810 preforms
(preform drawings available upon request)
Current owner started converting the 40gm Preform Mould to 25 gm preform weight,
but this has not been completed.
1993 Netstal HP 3500/3550-R PET Preform
Injection moulding machine
Working hours : 49,300 hrs. good condition –
no major breakdown and repair
Heating / electrical circuit refurbished 2005
Hekuma Robot (Year 1993)
Working hours : 49,300 hrs good condition – no major breakdown and repair
Electrical circuit refurbished 2009
Brushless motor installed on up/down movement 2009
Sytrama Robot (Year 1993)
Working hours : 49,300 hrs. good condition – no major breakdown and repair
Mould hot runner control : VETTER MTC-119 M 56 zones
Conveyor
Maintenance:
2005: New hydraulic motor for dosage
2005: Refurbishment of electrical circuit + electrical circuit for heating
protection
2007: Complete refurbishment of injection piston and dosing unit (O-ring and
bearings)
2008: New hydraulic pumps + refurbishment of the motor
2009: New electrical circuit for Hekuma robot + brushless motor installed on
up/down movement.
2011: High pressure filter device on the pump exit.
2011: New hydraulic cooling exchanger.
2011: complete refurbishment of all MOOG hydraulic valves.
1992 Husky XL 300 SP340/120 E100
Consists of :
Husky XL300 s PET Preform Injection Moulding machine
Somos D900 PET Resin Dryer and 3000L Material Hopper
Dehumidying Enclosure (no dehumidifier)
Machine does not include Take Out Robot (does include the Robot enclosure)
Is no longer in production.
1997 Husky SX600 p120/120 e120
120 mm screw
Working hours : approx 84,000 hrs.
Includes :
Somos D2000 Resin Dryer and Hopper
Eisbär Dehumidifier
3-Stage Take Out Robot
96-Cavity Husky preform mould for 17.0/20.0 gm PCO1810 preforms (Pitch 152 x 60)
(Preform drawing available upon request)
2007 Krauss Maffei KM175-1900CV
System includes :
Piovan DP 624HT PET Resin Dryer
Piovan Material Loader
Piovan TN3500 Material Hopper
Eisbär DAS E16 Mould Dehumidifier
Conveyor
48 cavity Preform Moulds :
1. 11.1gm 30/25 – Full mould
2. 26.0gm 30/25 – Full mould
3. 21.7gm 30/25 – Core change for 26.0gm mould
(Preform drawings available upon request)
Power Consumption :
KM machine load – 242 kw
Material dehumidifier dryer – 76 kw
Mold dehumidifier – 19 kw
Chiller 60tr – 78 kw
Cooling tower – 11 kw
Total connected load for KM machine with utilities is 426 kw.
Actual load is 260kw (approximately).
1994 Krupp P130 Es 10000/500 - R
PET Resin Dryer and Hopper
Take Out Robot
Mould Dehumidifier
Trane Chiller
Spare parts for machine and moulds
(2) Sullair LS-10 Air Conditioners
72 Cavity preform moulds for :
43gm 28mm PCO preforms
Cycle time : 23.4 sec
Output : 11077 preforms/hour
38gm 28mm PCO preforms
Cycle time : 23.4 sec
Output : 11077 preforms/hour
47gm 28mm PCO preforms
Cycle time : 24.5 sec
Output : 10580 preforms/hour
38gm 30/25 preforms
Cycle time : 23.4 sec
Output : 11077 preforms/hour
1995 Netstal HP 3500/3550 R
Working hours (June 2010) : 110,100 hrs.
Includes :
PET Resin Dryer & Hopper
Chiller
Dehumidifier
Hekuma 3-Stage Take Out Robot
Possibility to include the following moulds:
48-Cavity Hofstetter Preform mould for 18gm Edible Oil preforms (Preform Drawing
available upon request)
48-Cavity Hofstetter Cold Half for 47.5gm BPF preforms(Preform Drawing available
upon request)
48-Cavity Hofstetter Cold Half for 29gm 30/25 preforms(Preform Drawing available
upon request)
1996 Nestal HP3500/3550 R
Working hours (June 2010) : 100,300 hrs.
Includes :
PET Resin Dryer & Hopper
Chiller
Dehumidifier
Hekuma 3-Stage Take Out Robot
Possibility to include the following moulds:
48-Cavity Hofstetter Preform mould for 18gm Edible Oil preforms (Preform Drawing
available upon request)
48-Cavity Hofstetter Cold Half for 47.5gm BPF preforms(Preform Drawing available
upon request)
48-Cavity Hofstetter Cold Half for 29gm 30/25 preforms(Preform Drawing available
upon request)
Can be inspected in production until end of 2010.
Working hours :
Motor running hours is 11395 and Machine running hours is 10716
SIG Premax 48 ES 4550/320K
System dismantled and in storage.
Includes:
Multi Grip Premax-48 Robot (1995)
Somos D900 PET Resin Dryer (With 2700L hopper and EFG-Steuerung hopper
loader)(1994)
Eisbar DAS 111 Mould Dehumidifier (1996)
KKT-Krauss GmbH SLA-167 N2 Chiller (process)(1996)
KKT-Krauss GmbH KLA 43T Chiller (oil) (1996)
Atlas Copco GA 7 Compressor (1998)
SIG 48-Cavity Preform Mould (1998)
Type of preform : 28.0gm 28mm PCO
Set of Cores : 24.0gm 28mm PCO
Set of Cores : 20.3gm 28mm PCO
Cycle Times :
28.0gm PCO – 21.0 sec
24.0gm PCO – 16.5 sec
20.3gm PCO –
2000 Sig premax 96 ES7050/500K
PET Preform Injection Moulding Machine equipped with:
Engel CC100 Microprocessor Control
Accumulator Package with Independent Charging
Post Pressure Injection
Independent Plasticizing
Proportional Screw Speed Control
CC 100 EL Level 2 software
CC 100 EL Microplast/Microflow Processing software
CC 100 EL Process Data-GRaphics & Report
Closed Loop Injection Control via Servo Valve
Ceramic Heater Band
Engel CC100 Hot Runner Temperature Control
Auxiliary Bypass Oil Filtration
Nitrogen Filling Device for Accumulator
System includes:
SIG ES7050/500K PET Preform Injection Moulding machine
TPS Take Out RObot
Somos D1600 PET Resin Dryer
Eisbar DAS 222 Mould Dehumidifier
96-Cavity 40.3gm PCO SIG Preform Mould (2001) – Completely refurbished July 2005
– Cycle time 17.5 sec.
| 
![[Under Construction]](images/undercon.gif)
